Elevator installation equipment · Steel fabrication · Hyderabad

Elevate. Protect. Perform.

Rui Edit designs and fabricates WOS / false cars, supplies electric reeving hoists and motors from established manufacturers, and fabricates landing safety barricades, all on sale or lease. From Hyderabad, we serve leading elevator multinationals across India and export to international markets.

Request a quote Explore products

Sale & leaseOn every product

IEC licensedExport ready

1200 × 2200 mmStandard barricade, W × H

Rui Edit WOS / false car with electric reeving hoist in an elevator shaft — **WOS / false car**Modular · Made to your shaft Buy · Lease

Supplier to leading elevator MNCs

Product range

Equipment for the shaft

WOS / false cars and barricades are fabricated in-house to your shaft and door dimensions. Hoists and motors are sourced from established manufacturers. Everything is available on sale or lease.

RE-01

WOS / false car in an elevator shaft with guardrails, hoist, control box and installer

WOS / false cars

Electric personnel carrier for elevator installers

The false car is installed in the elevator shaft and carries your team and their tools through most stages of the job, from rail and bracket fixing to landing doors. It replaces floor-by-floor scaffolding with a safe, comfortable place to work.

UseMost phases of installation without scaffolding (WOS)
DesignModular, configured to the width and depth of each shaft
BuildFabricated steel deck with guardrails and toe boards
DriveElectric reeving hoists (see RE-02)

BuyLeaseExportEnquire

RE-02

Electric reeving hoist machines

Wire-rope hoists that pass the rope through the unit, so the false car can climb the full height of the building on a single rope run.

UseRaising and lowering WOS / false cars
SourceProven units from established hoist manufacturers
SupplyNew units for sale, serviced units for lease
IncludesWire rope, controls and safety devices on request

BuyLeaseExportEnquire

RE-03

Motors & false car accessories

Drive motors, control pendants, safety gear and other parts that go with a WOS / false car setup, sourced from established manufacturers. Tell us what you are running and we will supply the match.

UseComplete or upgrade an existing false car
SupplySold or leased with the hoist and false car
SupportReplacement parts for leased equipment

BuyLeaseExportEnquire

RE-04

Landing safety barricade fitted at an elevator entrance

Landing safety barricades

Steel barricades that close off open landing doors while the elevator is being installed, so no one on the floor can step or fall into the shaft.

BuildMild steel, powder-coated
DesignDouble-door mesh panels, or bar-type with safety signage
SizingStandard 1200 mm W × 2200 mm H, or made to your door opening widths
ExtensionRemovable top section for openings taller than 2200 mm

BuyLeaseExportSee projects

RE-01 · On site

WOS / false cars in use

False cars rigged in the shaft with electric reeving hoists, guardrails and safety signage, ready for installation work without scaffolding.

Installer on a WOS / false car with guardrails, hoist and control box — False car rigged and in use

False car seen from the landing, with hoist and control box — View from the landing

Front of the false car showing the hoist, control box and fire extinguisher — Hoist, controls and fire extinguisher

Electric reeving hoist mounted on the false car deck — Electric reeving hoist (RE-02)

Steel support frame beneath the false car — Steel support frame

False car with overhead protective canopy and installers at work — Overhead protective canopy

RE-04 · On site

Barricades in use

Double-door barricades fitted at landing entrances on live projects. Where the opening is taller than 2200 mm, a removable top extension closes the gap.

Yellow double-door mesh barricade standing at a landing — Double-door mesh barricade · 1200 × 2200 mm

Barricade with removable top extension fitted at a finished landing — With removable top extension

Tall barricade with top extension at a block-work landing — Extension for taller openings

Bar-type barricade with Elevator Construction Falling Risk sign and hazard-striped kick plate — Bar-type with safety signage

Barricades fitted at two adjacent elevator landings — Fitted across multiple landings

Freshly powder-coated bar-type barricade in the workshop — Powder-coated in our workshop

Fig. 1 · Shaft sectionNot to scale

How it fits together

One supplier for the whole shaft

01
Close every landing
Barricades go up at each open landing door before work starts in the shaft.
02
Rig the false car
The WOS / false car is hung from the top of the shaft on wire rope.
03
Climb with the hoist
Electric reeving hoists move the false car floor by floor as rails and doors are fitted.